Thatcham Category 2 to 1 upgrade alarm system, providing perimeter and ultrasonic interior protection


  * Thatcham Category 2 to 1 upgrade alarm system, providing perimeter and ultrasonic interior protection
  * Switched from vehicle’s existing OE remote controls
  * Supplied with self powered siren, and tri-coloured status LED
  * The system has negative lock/unlock outputs to switch negative controlled CDL systems
  * Single immobilisation circuit
  * Key theft protection facility - only with the optional keypad
  * Auxiliary siren, armed accessory, interior lamp illumination and headlamp illumination outputs
  * Sophisticated programming and diagnostic facility via the keypad

Security Features
  * Switches securely from the vehicle’s existing OE remote
  * Perimeter protection circuit for boot and bonnet (negative input)
  * Perimeter protection circuit for doors (positive or negative input)
  * Closed loop protection circuit (looped wire to protect accessories, trailers, bike racks etc)
  * Ignition detection circuit
  * Ultrasonic interior protection (base sensitivity adjustable, length of disturbance adjustable, and automatically adjusts if any movement is detected during the threshold time)
  * Single immobilisation circuit (18 amp continuous/30 amp max)
  * Manual arm, using the vehicle’s existing OE remote (or programmable auto arm, which automatically arms the system 60 seconds after the last door is shut - adjustable between 1 and 99 seconds. Auto arm can also be programmed to lock the vehicle if required)
  * Auto re-arm can be programmed to re-arm the system if a door is not opened within 60 seconds of disarming the system -adjustable between 1 and 99 seconds. Auto re-arm also re-locks the vehicle
  * Key theft protection feature can be turned on to prevent the OE radio keys automatically de-activating the immobilisation when the alarm system is disarmed. In this mode the system’s PIN must also be entered into the keypad before the vehicle can be started. This prevents theft of a vehicle even with the owner’s keys
  * Last trigger identification via the dashboard LED and a record of the elapsed time since the last trigger, can be recalled using the keypad
  * The total trigger count memory for each individual circuit since the system was installed or the memory re-set is also stored in the system’s memory
  * Additional plug in single stage sensor socket (see optional accessories)
  * Additional plug in dual stage sensor socket and siren pre-warn facility (see optional accessories)
  * Secure data linked, self powered siren included

Convenience Features
  * Negative door locking/unlocking control (with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period)
  * Armed output (negative 200mA max )
  * Additional siren/pager output (negative 200mA max)
  * Interior lamp illumination output (negative 200mA max)
  * Headlamp illumination output (negative 200mA max)
  * Secure ignition PIN override
  * Secure PIN override using the keypad
  * Silent arm and disarm (audible bleeps can be programmed back on, however this will breach current legislation)
  * The last circuit to trigger can be excluded using the keypad
  * The vehicle’s battery voltage can be checked using the keypad
  * The sensors are excludable using the keypad or repeated arming

Personal Safety Features
  * Auto lock can be programmed to lock the vehicle at the start of a journey when the ignition is turned on, and then unlock when the ignition is turned off. This can be excluded on individual occasions

S32 Box Contents
S32 alarm ECU
ECU brackets and fixing screws
S32 alarm installation wiring loom
6-wire accessory wiring loom
Secure data linked, self powered siren
Siren lead with plug with bonnet switch wire
Siren bracket and fixings
Tri-colour LED and loom
Two ultrasonic heads, looms and fixings
Operating instructions and PIN stickers
Certificate of installation
Two Sigma window stickers
Sheet of remaining foil stickers

Optional Accessories
Single Stage Sensors
T-TS1 Tilt sensor. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
AS610 Single stage shock sensor. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
AS620 Single zone microwave. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
Dual Stage Sensors
AS625 Dual zone microwave. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
T2SS Dual stage shock sensor. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
Other
2012054 RF pager

Quality and Approvals
Thatcham “Category 2 to 1” approved for passenger cars: 

TC2 – 1299/0204
Thatcham “Category L2 to L1” approved for light commercial vehicles: 
TUL1-105/0304
EU 95/56 directive (security) and EU 95/54 directive (electrical) – “e” marked:
Two year warranty E1 A-00 0475